SM10 F or K or D Grind Sand Wedge

Follow Thread

By Mike A

  • 4 Likes
  • 77 Replies
  1. John W

    John W
    Lansing, MI

    I've had D and F in my 54 degree wedges and honestly preferred the F, even out of sand. I really want them to come out for a .14K for the sand wedges, but so far no luck.
  2. Lou G

    Lou G
    San Diego, CA

    John W said:

    I've had D and F in my 54 degree wedges and honestly preferred the F, even out of sand. I really want them to come out for a .14K for the sand wedges, but so far no luck.

    The F grind bent strong by 2* is good for various conditions. Been playing 54-14F (52*) for a year now. Just switched to a jet black 56-14F (set to 54). My LWs are 60-06K and a PM Grind 64/10. I keep a 58-12D for courses like Torrey Pines and it is actually pretty versatile but the F and low K are better off tight lies.

    I played K grind between 2019-2023. Its shortcoming is flop shots or open face (which is where D Grind wins out); however, it works better for hitting off hard lies vs D grind. Been a trade off.
    Post Image
  3. SCochrane

    SCochrane
    Canada

    Just upgraded my wedges this fall, 3x SM10. Kept my 50 F and 54 F the same but switched my 58 from a K to a D. K was definitely easier to get our of bunkers with but D gives me so much more versatility around the greens. I was always worried about my steep swing and larger divots but the D - 12 grind has been the best of both worlds so far. Enjoy!!
  4. Lou G

    Lou G
    San Diego, CA

    All jet black. 48-10F (46*)-56-14F (54*)-60-06K and PM Grind 64/10. 58-12D for places like Torrey Pines.
  5. Edward K

    Edward K
    Wesley Chapel, FL

    Military
    I just buy all the same grind/bounce and go play golf, nothing complicated about. No experimenting, no grinding, no swapping out regularly. I know my yardages, and ground conditions. Golf is too complicated as it is to worry about exact gapping and changing clubs for specific courses. Just have fun!
  6. Lou G

    Lou G
    San Diego, CA

    My basic "gaping" (sic, "gapping") is 46-50-54-60-64 with a 58-14K (57) for fluffy bunkers. The bare necessities are 46-54-60-64.
  7. Lou G

    Lou G
    San Diego, CA

    Lou G said:

    My basic "gaping" (sic, "gapping") is 46-50-54-60-64 with a 58-14K (57) for fluffy bunkers. The bare necessities are 46-54-60-64.

    K and Low Bounce K for lob wedges. PW, GW, SW are F grind.
  8. tkm

    tkm
    Raleigh,NC

    Hey Mike, if you're searching for versatility D grind is the way to go.
  9. Lou G

    Lou G
    San Diego, CA

    58-12D set to 57 has been a go to. It actually hits better overall vs 56-12D stock. I have a 60-06K that I'll bring on unknown courses.
  10. Lou G

    Lou G
    San Diego, CA

    What one sees on my thumbnail is my setup. Have 56-14F (55*) for a sand wedge and 60-06K for a lob wedge. Between 2018-2022 played a K grind 2* strong as a sand wedge. I had also alternated between D grind and K grind.

    K grind is a little bit better vs D grind for hitting off firmer lies but the latter is better for open face and flop shots

    F grind works better than D grind off the fairway for pitching and is about even on soft lies and sand. I tried 54-12D set to 52 as a gap wedge and switched to 54-14F (set to 52). I'd been using the 54-14F vice a 52-12F because the former was straighter. About 6 months ago switched to a 56-14F and also found that my lie angle on the 52-12F was 1/2* too upright so I matched it to the 46-10F.

    I've had 60-06K in my bag about a year and a half now. Started with the Wedgeworks version and switched to jet black a year ago. I can hit on a wide variety of lies and it works nicely on flop shots. Have to sweep when hitting off soft lies.

    I use a 46-10F (44*) in place of a 9 iron.

  11. Lou G

    Lou G
    San Diego, CA

    This is my thumbnail as of today and is general purpose. The attachment is what I would play if at Torrey Pines. I've been using 58-12D (57*) for quite some time as a "sand wedge".
    Post Image
  12. Lou G

    Lou G
    San Diego, CA

    What one sees in my thumbnail is my "full" bag. My "sand wedge" is a 58-12D set to 57.

    I played K grind between 2018-2023 and have been alternating between it and D grind since then. K grind and D grind are about even on turf. The D grind for me is optimized at 1* strong and the K grind 2* strong. D grind is better for open face shots and is much easier out of soft or coarse sand. Been exclusively using D grind for 9 months now.

    I carried a 54-14F (set to 52) for 2 years and it was great for pitching and the occasional long bunker shot. I was also playing a wedge setup of 46-52-58-64. I added low bounce K mid 2024 so I changed the loft of the D grind to 57*.

    I acquired the Wedgeworks 44F late 2025 (set to 42* as a 9 iron replacement) and went to a 52-12F (set to 50), which has been an optimal combo. I also played a 56-14F (set to 54 for bounce optimization); it was OK in soft sand and good for turf but the D grind is better in soft sand).

    Not counting the 44F, my 3 wedge setup is 50-57-60 (in the attached image with a local vendor for the 60).
    Post Image
  13. Lou G

    Lou G
    San Diego, CA

    In the image below, that's my entire arsenal. The left is the same as my thumbnail. 58-12D and 60-04T for greenside (57-60). I've been solid on D grind for over a year. I played K grind between 2018-2023 paired with a Phil 64 (shown on the bottom right with a 60-06K that I played over a year with the Wedgeworks 60-06K preceding). Was alternating between K and D grind (2* strong for both until a year ago). The upper right is a local brand wedge paired with 64T.

    I've been pretty comfortable with 58-12D set to 57.

    I used to spurn T grind before because it appeared low bounce K performed better around the greens. With the 64T, learned that technique matters and it actually does work both in wet and soft sand or thick grass and hard lies; all about ball position. It is now more versatile than low bounce K.


    The limitation with K grind is open face shots. Low bounce K limitation is soft sand.

    Being straightforward, S and M grind are good general purpose clubs (I played a 54S set to 52 for 3 years because it played better vs 52-08F) but they're horrendous for soft sand. I had been playing 48-10F and 54-14F set 2* strong for the past 2 years. The F grind sand wedge was good for long bunker shots and general purpose pitching.


    My local fitter talked me into a Wedgeworks 44F about Sept 2025. It had an NSPro950/GH S and I set it to 42*. Also reshafted my 8 iron with the same shaft and these two have been a "1-2 punch." I also had been trading off between the 54-14F and a 52-12F but the latter would miss left by 5 yards; I flattened the lie angle to 65* on the latter and set the loft to 50* after putting the 44F in the bag. "50-10F" is my general purpose "pitching wedge" and it is great for long bunker shots in soft sand, plus clearing obstacles.


    42-50-57-60 is good. I played 46-52-58-64 almost 5 years. 695MB 7-9 irons 2020-2023, 716CB 7 iron and 716MB 8 iron (32-39) 2023-2024. Replaced the 7 iron with Sumo2 SQ 34 hybrid (I played one 2012-2015; luckily found one in 2024 with a stiff shaft) and it is a no brainer. T200 9 iron until about Mar 2025; 620CB 8 iron since then because it picks the ball better.


    Can't say enough about the 44F and 52-12F within 100 yards.
    Post Image
  1. Prev
  2. 1
  3. 2
  4. 3

Please login to post a comment.

Sign In

Haven't registered for Team Titleist yet?

Sign Up